New CynkoMet Kipper / Trailer / Remorque / Rimorchio / Przyczepa 15 t tractor trailer
≈ €34,810
Czarna
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 608 80...
Show
+48 608 800 049
Poland 
5,160 kg
Poland, Bialystok, Podlaskie
Poland, Podegrodzie
5,000 kg
Poland, Bialystok, Podlaskie
11,000 kg
Poland, Golcza, Małopolskie
3,600 kg
Poland, Golcza, Małopolskie
3,300 kg
Poland, Golcza, Małopolskie
1,140 kg
Poland, Pilica
3,680 kg
Poland, Pilica
5,650 kg
Poland, Gołdap
3,600 kg
Poland, Golcza, Małopolskie
8,300 kg
Poland, Starkówiec Piątkowski
Poland, Lipnik
Poland, Podegrodzie
Poland, Podegrodzie
2,700 kg
Poland, Olesno
3,600 kg
Poland, Olesno
1,610 kg
Poland, Olesno
4,000 kg
Poland, Olesno
3,300 kg
Poland, Olesno
Poland, Podegrodzie
- Wall height ~ 900 mm with thickness 5mm
- Rear “flap” closed hydraulically, securing rear hydraulic hatch and extending the chute during unloading. Flap actuators secured by hydraulic lock. The flap opens automatically when the cargo box is raised.
- Hot-galvanized exterior ladder with anti-skid steps, facilitating access to cargo box
- Maintenance support of cargo box, hot-galvanized
- Hot-galvanized drawbar with exchangeable eye, rubber shock absorbers, homologated
- Bolted hitch tension member dia. 50
- Cargo box frame painted in two steps (prime coat/topcoat) with high-grade paints
- Back-tipping shell-type box made of HARDOX 500 Tuff steel, floor made of 8 mm sheet, walls made of 5 mm sheet
- Floor made of single sheet, thickness 8mm
- Hot-dip galvanized bottom frame (protection of the structure on the exterior and interior of profiles),
stringers of the frame made of 250x150x8 closed sections
- Parking handbrake with crank
- Hydraulic drawbar support with built-in hydraulic lock
- Homologated, hot-galvanized bumper
- Rear gravity hatch with hydraulic closure, made from 5 mm-thick HARDOX 500 Tuff sheet)
- Tipping installation protected against excessive box inclination by cut-off valve
- Lighting installation connector cable with 7PIN 12V plug
- 12V lighting, homologated, rear bulb lamps, LED perimeter lighting
- Hydraulic installations made of galvanized steel tubes and flexible hoses
- Hydraulic connectors to tractor, type ISO 7241-1 DN 12.5
- Homologated, double-circuit, pneumatic brake system with automatic braking force adjustment, with output for second trailer.
- Rear hydraulic, electrical and brake output to the second trailer
- Hydraulic lock on actuator of flap, protecting against uncontrolled opening of rear wall
- New 385/65 R22.5 wheels
- Axles from renowned ADR company, full beam with 100 mm square cross-section, 406×120 brake, 10-pin
- Parabolic leaf spring suspension
- Two wheel chocks placed in galvanized pockets
- Telescopic actuator, eight-level, pitch 2180 mm. Useful force at eighth level with diameter 53 mm, at nominal pressure 16MPa = 20T
- Wheel fenders
Optional equipment payable:
- Spare wheel winch
- Automatic hitch for the second trailer
- Manual hitch for the second trailer
- Hydraulic brake system (homologation)
- Side underride guards
- Tool box
- Hydraulically lockable tailgate
- Warning triangle
- Hydraulic quick coupler with line pressure eliminator
- Hitching cable for ball fi80 mm
- Extensions for cubic cargo 1000 mm
- Tarpaulin frame (only for assemblies with extensions)
- Tarpaulin (only for combinations with extensions)
- Spare wheel 385/65 R22.5
- Surcharge for 445/65 R22.5 wheels
- Spare wheel 445/65 R22.5
- Surcharge for 400/60 22.5 wheels
- Spare wheel 400/60 22.5
- Surcharge for 600/50 R22.5 wheels
- Spare wheel 600/50 R22.5